 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www.fairchildsemi.com LM2904,LM358/LM358A,LM258/ LM258A Dual Operational Amplifier Features * Internally Frequency Compensated for Unity Gain * Large DC Voltage Gain: 100dB * Wide Power Supply Range: LM258/LM258A, LM358/LM358A: 3V~32V (or 1.5V ~ 16V) LM2904 : 3V~26V (or 1.5V ~ 13V) * Input Common Mode Voltage Range Includes Ground * Large Output Voltage Swing: 0V DC to Vcc -1.5V DC * Power Drain Suitable for Battery Operation. Description The LM2904,LM358/LM358A, LM258/LM258A consist of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltage. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifier, DC gain blocks and all the conventional OP-AMP circuits which now can be easily implemented in single power supply systems. 8-DIP 1 8-SOP 1 Internal Block Diagram OUT1 1 8 VCC IN1 (-) 2 + 7 OUT2 6 IN2 (-) IN1 (+) 3 + GND 4 5 IN2 (+) Rev. 1.0.2 (c)2002 Fairchild Semiconductor Corporation LM2904,LM358/LM358A,LM258/LM258A Schematic Diagram (One section only) VCC Q5 Q6 Q12 Q17 Q19 Q20 Q2 IN(-) Q1 R2 IN(+) Q11 Q21 Q15 Q7 Q8 Q9 Q10 Q13 Q14 Q16 OUTPUT Q3 Q4 C1 Q18 R1 GND Absolute Maximum Ratings Parameter Supply Voltage Differential Input Voltage Input Voltage Output Short Circuit to GND VCC15V, TA = 25C(One Amp) Operating Temperature Range Storage Temperature Range Symbol VCC VI(DIFF) VI TOPR TSTG LM258/LM258A 16 or 32 32 -0.3 to +32 Continuous -25 ~ +85 -65 ~ +150 LM358/LM358A 16 or 32 32 -0.3 to +32 Continuous 0 ~ +70 -65 ~ +150 LM2904 13 or 26 26 -0.3 to +26 Continuous -40 ~ +85 -65 ~ +150 Unit V V V C C 2 LM2904,LM358/LM358A,LM258/LM258A Electrical Characteristics (Vcc = 5.0V, VEE = GND, TA = 25C, unless otherwise specified) Parameter Symbol Conditions VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0 VCC = 30V (LM2904, VCC=26V) RL = , VCC = 30V (LM2904, VCC=26V) RL = , VCC = 5V VCC = 15V, RL= 2k VO(P) = 1V to 11V LM258 LM358 LM2904 Unit Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. 2.9 5.0 2.9 7.0 2.9 7.0 Input Offset Voltage Input Offset Current Input Bias Current Input Voltage Range VIO mV IIO IBIAS VI(R) 0 50 3 45 0.8 0.5 100 28 5 85 100 120 40 30 150 Vcc -1.5 2.0 1.2 20 60 0 25 26 27 65 65 - 5 45 0.8 0.5 100 28 5 80 100 120 40 50 250 Vcc -1.5 2.0 1.2 20 60 0 25 22 23 50 50 - 5 45 0.8 0.5 100 24 5 80 100 120 40 50 250 Vcc -1.5 2.0 1.2 20 60 nA nA V mA mA V/mV V V mV dB dB dB mA Supply Current Large Signal Voltage Gain ICC GV VO(H) Output Voltage Swing VO(L) Common-Mode Rejection Ratio Power Supply Rejection Ratio Channel Separation Short Circuit to GND CMRR PSRR CS ISC VCC=30V RL = 2k 26 (VCC RL= =26V for 27 10k LM2904) VCC = 5V, RL= 10k f = 1kHz to 20kHz (Note1) 70 65 - VI(+) = 1V, VI(-) = 0V ISOURCE VCC = 15V, VO(P) = 2V Output Current ISINK VI(+) = 0V, VI(-) = 1V, VCC = 15V, VO(P) = 2V VI(+) = 0V,VI(-) =1V , VCC = 15V, VO(P) = 200mV - 20 30 - 20 30 - 20 30 - mA 10 15 - 10 15 - 10 15 - mA 12 - 100 - VCC 12 - 100 - VCC - - VCC A V Differential Input Voltage VI(DIFF) Note: 1. This parameter, although guaranteed, is not 100% tested in production. 3 LM2904,LM358/LM358A,LM258/LM258A Electrical Characteristics (Continued) (VCC= 5.0V, VEE = GND, unless otherwise specified) The following specification apply over the range of -25C TA +85C for the LM258; and the 0C TA +70C for the LM358; and the -40C TA +85C for the LM2904 Parameter Symbol Conditions LM258 LM358 LM2904 Unit Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Input Offset Voltage Input Offset Voltage Drift Input Offset Current Input Offset Current Drift Input Bias Current Input Voltage Range Large Signal Voltage Gain VIO VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0 RS = 0 - - - 7.0 - - 9.0 - - 10.0 mV VIO/T IIO IIO/T IBIAS - 7.0 10 40 100 300 Vcc -2.0 - 7.0 10 40 150 500 Vcc -2.0 - 7.0 45 10 40 200 500 Vcc -2.0 V/C nA pA/C nA VI(R) VCC = 30V (LM2904 , VCC = 26V) VCC = 15V, RL =2.0k VO(P) = 1V to 11V VCC=30V RL = 2k (VCC = 26V for RL=10k LM2904) VCC = 5V, RL=10k 0 - 0 - 0 - V GV 25 26 27 - 28 5 20 15 26 27 - 28 5 20 15 22 23 - 24 5 20 V/mV V V mV Output Voltage Swing VO(H) VO(L) Output Current VI(+) = 1V, VI(-) = 0V ISOURCE VCC = 15V, VO(P) = 2V ISINK 10 30 - 10 30 - 10 30 - mA VI(+) = 0V, VI(-) = 1V VCC = 15V, VO(P) = 2V - 5 8 - 5 9 - 5 9 - mA Differential Input Voltage VI(DIFF) - - VCC - - VCC - - VCC V 4 LM2904,LM358/LM358A,LM258/LM258A Electrical Characteristics (Continued) (VCC = 5.0V, VEE = GND, TA = 25C, unless otherwise specified) Parameter Input Offset Voltage Input Offset Current Input Bias Current Input Voltage Range Supply Current Large Signal Voltage Gain Output Voltage Swing Common-Mode Rejection Ratio Power Supply Rejection Ratio Channel Separation Short Circuit to GND Symbol VIO IIO IBIAS VI(R) ICC GV VOH VO(L) CMRR PSRR CS ISC ISOURCE Output Current ISINK VCC = 30V RL = ,VCC = 30V RL = , VCC = 5V VCC = 15V, RL= 2k VO = 1V to 11V VCC = 30V RL = 2k RL =10k Conditions VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0 LM258A Min. Typ. 0 50 26 27 70 65 20 10 12 1.0 2 40 0.8 0.5 100 28 5 85 100 120 40 30 15 100 LM358A Max. 3.0 30 100 VCC -1.5 2.0 1.2 20 60 VCC Unit mV nA nA V mA mA V/mV V V mV dB dB dB mA mA mA A V Max. Min. Typ. 3.0 15 80 VCC -1.5 2.0 1.2 20 60 VCC 0 25 26 27 65 65 20 10 12 2.0 5 45 0.8 0.5 100 28 5 85 100 120 40 30 15 100 - VCC = 5V, RL=10k f = 1kHz to 20kHz (Note1) VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V Vin + = 0V, Vin (-) = 1V VO(P) = 200mV - Differential Input Voltage VI(DIFF) Note: 1. This parameter, although guaranteed, is not 100% tested in production. 5 LM2904,LM358/LM358A,LM258/LM258A Electrical Characteristics (Continued) (VCC = 5.0V, VEE = GND, unless otherwise specified) The following specification apply over the range of -25C TA +85C for the LM258A; and the 0C TA +70C for the LM358A Parameter Input Offset Voltage Input Offset Voltage Drift Input Offset Current Input Offset Current Drift Input Bias Current Input Common-Mode Voltage Range Output Voltage Swing Symbol VIO VIO/T IIO IIO/T IBIAS VI(R) VO(H) VO(L) Large Signal Voltage Gain GV ISOURCE Output Current ISINK Differential Input Voltage VI(DIFF) VCC = 30V VCC = 30V RL = 2k RL = 10k Conditions VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0 LM258A LM358A Unit mV V/C nA pA/C nA V V V mV V/mV mA mA V Min. Typ. Max. Min. Typ. Max. 0 26 27 25 10 5 7.0 10 40 28 5 30 9 4.0 15 30 200 100 Vcc -2.0 20 VCC 0 26 27 15 10 5 7.0 10 40 28 5 30 9 5.0 20 75 300 200 Vcc -2.0 20 VCC VCC = 5V, RL=10k VCC = 15V, RL=2.0k VO(P) = 1V to 11V VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V - 6 LM2904,LM358/LM358A,LM258/LM258A Typical Performance Characteristics Figure 1. Supply Current vs Supply Voltage Figure 2. Voltage Gain vs Supply Voltage Figure 3. Open Loop Frequency Response Figure 4. Large Signal Output Swing vs Frequency Figure 5. Output Characteristics vs Current Sourcing Figure 6. Output Characteristics vs Current Sinking 7 LM2904,LM358/LM358A,LM258/LM258A Typical Performance Characteristics (Continued) Figure 7. Input Voltage Range vs Supply Voltage Figure 8. Common-Mode Rejection Ratio Figure 9. Output Current vs Temperature (Current Limiting) Figure 10. Input Current vs Temperature Figure 11. Voltage Follower Pulse Response Figure 12. Voltage Follower Pulse Response (Small Signal) 8 LM2904,LM358/LM358A,LM258/LM258A Mechanical Dimensions Package Dimensions in millimeters 8-DIP 0.018 0.004 1.524 0.10 0.060 0.004 0.46 0.10 6.40 0.20 0.252 0.008 ( #1 #8 9.20 0.20 0.362 0.008 9.60 MAX 0.378 #4 #5 2.54 0.100 5.08 MAX 0.200 7.62 0.300 3.40 0.20 0.134 0.008 3.30 0.30 0.130 0.012 0.33 MIN 0.013 0.25 -0.05 0~15 +0.10 0.010 -0.002 +0.004 0.79 ) 0.031 9 LM2904,LM358/LM358A,LM258/LM258A Mechanical Dimensions (Continued) Package Dimensions in millimeters 8-SOP MIN 1.55 0.20 0.061 0.008 0.1~0.25 0.004~0.001 #1 #8 4.92 0.20 0.194 0.008 5.13 MAX 0.202 ( #4 #5 6.00 0.30 0.236 0.012 +0.10 0.15 -0.05 +0.004 0.006 -0.002 0.56 ) 0.022 1.80 MAX 0.071 MAX0.10 MAX0.004 3.95 0.20 0.156 0.008 5.72 0.225 0.50 0.20 0.020 0.008 10 0~ 8 1.27 0.050 0.41 0.10 0.016 0.004 LM2904,LM358/LM358A,LM258/LM258A Ordering Information Product Number LM358N LM358AN LM358M LM358AM LM2904N LM2904M LM258N LM258AN LM258M LM258AM Package 8-DIP 0 ~ +70C 8-SOP 8-DIP 8-SOP 8-DIP -25 ~ +85C 8-SOP -40 ~ +85C Operating Temperature 11 LM2904,LM358/LM358A,LM258/LM258A DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 8/26/02 0.0m 001 Stock#DSxxxxxxxx 2002 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. |
Price & Availability of LM358M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |